52' Outbound Center Cockpit, 2020
Turnkey cruising sailboat that has been maintained to a very high standard and is ready to go.

Cinchona is a 2020 Outbound 52 center cockpit that is a very well built and well equipped bluewater cruising sailboat.The list of equipment on Cinchona is truly impressive and includes the following:
- Hard dodger with tempered safety glass
- Kevlar (Tarwon) hull lamination in hull for added strength
- Stainless steel bow sprit
- 77 lb stainless steel Ultra Anchor with 300′ of stainless chain
- Code Zero
- Storm Sail
- Electric genoa and jib furlers
- Electric winches
- Harken FlatWinder electric mainsail traveler system
- Spectra Catalina 340C DC Water maker
- Viking liferaft
- Simpson Davits with electric winches
- Highfield CL340 11′ RIB tender with Mercury 20hp outboard
- Cockpit cushions
- Full cockpit screen enclosure and shade panels can be attached to the bimini
- Espar hydronic diesel heater system (2022)
- New thruster/windlass battery bank of 2 group 31 AGM’s (2022)
- Wireless remote for thruster & windless (2023)
- Starlink (2023)
- Replaced windows between hard dodger & bimini with .40 gauge polycarbonate (2023)
- Complete cockpit enclosure (2023)
- Replaced Airmar DST 800 sensor with Airmar DST 810, bluetooth calibratable (2023)
- New Selden mainsail furling motor and integrated Selden outhaul winch (2024)
- New bimini with 2 additional 50 watt flexible solar panels (2024)
- New starter battery & house bank batteries (2025)
- New Raymarine Axiom 2 Pro 9 MFD chart plotter at helm (2025)
If you are looking for a bluewater cruising sailboat that truly ready to go anywhere in comfort and style, Cinchona is the boat you have been waiting for.
Price: $ 785,000 USD
Located: Barrington, RI – (Currently cruising in the Eastern Caribbean – in Northeast US/Canada May to October)
Hull Material: Fiberglass
Engine/Fuel Type: Single Diesel Inboard
Reference No: out052S002
ENGINE 1: Yanmar 4JH110 110 HP (1,900 Hours approximately)
LOA: 52′ / 15.84 meters
LWL: 47’10’″ / 14.35 meters
BEAM: 15’4″ / 4.69 meters
DRAFT: Max: 7’6″ / 2.32 meters
BALLAST: 15,000 lbs
DISPLACEMENT: 40,000 lbs
ACCOMMODATIONS: Two double berth cabins and one midship pilot berth cabin
BUILDER: Outbound Yachts
DESIGNER: Kernan Yacht Design
TYPE: Cutter
BUILT: 2020
TANKAGE:
Fuel: 273 Gals Total Capacity / 1033 liters
Water: 225 Gals Total Capacity / 851 liters
Holding: 47 Gals Total Capacity / 177 liters
Cinchona has a spacious two cabin layout with a center island berth in the forward cabin with generous storage which includes drawers under the aft end of the berth, large hanging lockers port and starboard, as well as shelves either side of the berth. The berth lifts up and there is a large bulk storage area that is large enough to accommodate folding bikes. The forward cabin also has abundant light and ventilation with large overhead hatch and two side ports. Moving aft is the forward head to port, which can be accessed from the forward cabin as well as the hallway, and features a shower stall with a curved plexiglass door. Across the hall from the head to starboard is additional drawer storage, hanging locker space, and the washer/dryer.
The salon has large deck and side windows along with hull port windows that provides light to the salon and enables you to see the outside world. The salon also has two opening overhead hatches which provide additional ventilation to the salon. On the port side of the salon is a large L-shaped settee with a burl redwood dinning table complete with Maple fiddles. There is also a removable bench seat for additional seating options at the table. On the starboard side of the salon there is a straight settee. Both port and starboard settees make excellent sea berths. Aft of the starboard settee is a proper nav station with a large level nav desk, generous storage, and ample space for your electronics and gauges.
If you continue aft from the salon on the starboard side you will enter the workshop/pilot berth area with a single berth that features a stainless steel work bench when the cushions are removed. Below the work bench are 6 slide out drawers that provide a proper spot for tools and spares which can be easily accessed. On the inboard side of this cabin is the electrical panel and door into the engine room. The engine room not only has access from this door but also the companionway opens on gas struts, providing easy access anything you might need to service in the engine compartment.
The galley is located on the port side of the hull aft of the salon with walk thru access to the aft cabin. On the inboard side of the galley you will find a large stainless steel sink forward followed by a two draw under counter stainless steel refrigerator, then three burner stove with oven and additional counter space and storage completes this side of the galley. On the outboard side of the galley you will find above counter refrigeration which is easily accessed by two doors as well as a top accessed freezer below the counter. Continuing aft on the outboard side is more above counter storage with a microwave mounted below the counter and large pantry at the aft end of the galley. Anyone working in the galley will also appreciate that there are two ports that open into the cockpit and two ports that open onto the side deck to provide excellent ventilation to the galley.
The spacious aft cabin can be accessed through the galley on the port side or though the workshop on the starboard side. The aft cabin features an island berth with two drawers at the forward end. On the port side there is a bench seat and a large louvered wardrobe. On the starboard side of the cabin there is a small desk with drawers and storage as well as another wardrobe. Forward of the berth in the aft cabin is a chest of drawers and access into the aft head. The aft head with a shower stall that can be accessed from both the head compartment and workshop/midship cabin.
HULL AND DECK Construction:
DECK FEATURES:
PROPULSION:
PLUMBING:
|
ELECTRICAL:
INTERIOR FEATURES:
NAVIGATION STATION:
GALLEY:
GROUND TACKLE:
SAILING HARDWARE:
SAILS:
|
