Maxi 1300

We will save you time, money and mistakes on your next boat.

Maxi 1300

A true short-handed performance cruiser, the Maxi 1300 is designed by sailing enthusiasts for sailing enthusiasts who welcome a challenge and the feeling of being at one with a yacht of true character.

Excellence through design ensures that every detail of the Maxi 1300’s deck provides maximum sailing pleasure and optimum safety in all conditions. Twin steering wheels and conveniently located winches provide total control to the solo sailor.

Refined production technology, selection of the best in materials and components plus a range of cutting-edge technical solutions result in unparalleled quality of the yacht’s structure and unmatched safety for the crew.

The interior, built in accordance with the best traditions in craftsmanship, oozes the impression of elegantly understated Scandinavian aesthetics and comfort.

The emotions evoked by the Maxi 1300 is difficult to put into words. Live your dreams. Experience Maxi yachts.

MAXI 1300 Specifications

Steering system two wheels
Keel type long keel
Length overall 12.70 m / 41.67 ft
Beam 3.80 m / 12.47 ft
Draft 2.25 m / 7.38 ft
Total weight 8300 kg / 18298 lbs
Ballast weight 3430 kg / 7562 lbs
Typ inboard
Engine 55 HP
Tank capacity 195.0 l / 42.9 gal.UK
Water tank 340.0 l / 74.8 gal.UK
Main sail area 49.00 m2 / 527.43 ft2
Genoa area 40.30 m2 / 433.79 ft2
Category CE A – 8

Hull 

  • White gelcoat.
  • Hull laminated in vinyloester resin.
  • Sandwich laminate made of 20 mm PVC core is used through out the hull.
  • Reinforcement from a mix between woven and uni-directional roving.
  • Solid laminate in the keel area as well as the laminate around major through hull fittings.
  • White topcoat on the hull in all lockers, bilges and similar exposed areas.
  • Striping with vinyl tape.
  • AntyfoulingInternal reinforcement 
  • Moulded hull stiffening and integrated innerliner grid.
  • Reinforcement from a tri-axial and uni-directional glass in tophat sections.
  • Forward and aft the grid is glued to the hull, while laminated to the hull in the keel area.
  • Structural bulkheads hand laminated and bolted to hull and grid.Keel 
  • 2.25 m draft with iron cast fin bolted to a lead bulb.Rudder and steering 
  • Balanced spade rudder.
  • Laminated rudder blade. Reinforcement from bi-axial and uni-directional roving.
  • Aluminium rudder stock and wings, which are glued to one half of the rudder before assembly.
  • Rack and pinion steering by a combination between rod and chain.
  • Twin 900 mm diam s/s wheels and friction brake.Deck 
  • White gelcoat.
  • Deck laminated in vinyloester resin.
  • Sandwich laminate between vinyloester, tri-axial and uni-directional roving and a 15 mm PVC core in all horizontal surfaces.
  • White topcoat in all exposed areas.
  • Glove boxes in the cockpit
  • Teak in cockpit, benches and bathing platform.Interior 
  • Interior in cherry

    Deck

  • White gelcoat.
  • Deck laminated in Vinylester resin.
  • Sandwich laminate between Vinylester, tri-axial and uni-directional roving and a 15 mm PVC core in all horizontal surfaces.
  • White topcoat in all exposed areas.
  • Glove boxes in the cockpit.
  • Teak in cockpit, benches and bathing platform.
  • Deck equipment for sail handling
  • Halyard & mainsheet winch 4x 45ST
  • Primary winch 2x 55ST
  • Mainsheet track 1x L=2000 mm
  • Jib track 2x
  • Clutch 2x triple 10–14 mm
  • Clutch 2x double 10–14 mm
  • Clutch 1x single 10–12 mm
  • Organizer 2x 5-sheaves
  • Jib car 2x w/torlon balls
  • Mainsheet car 1x w/torlon balls
  • Mainsheet ratio 2:1
  • Backstay ratio 48:1
  • Winch handle 2x 12″, 1x 10″
  • Foot blocks
  • Cam-Cleats
  • Ventilation, Windows, Skylights and Port lights
  • Flush Skylights: 1x large fwd cabin , 2x fwd cabin/heads 2x saloon.
  • Port light stainless steel frame, opening: 1x toilet, 4x aft cabin, 1x saloon, 370×164 mm.
  • Port light stainless steel frame, opening: 2x aft cabin, 402×195 mm.
  • Light inlets, fixed: 3x saloon.
  • Ventilator: 2x saloon, 1x forward cabin.
  • Other deck gear
  • Companion door in teak.
  • Canvas sprayhood with stainless steel tubing. Hide covered handle on aft edge of sprayhood.
  • Teak toe rail.
  • Guard rail.
  • Gate at stern.
  • Compass.
  • Flagpole.
  • Stainless steel deck gear
  • Pulpit 2x Bow (stb/pt)
  • Pushpit 2x Stern (stb/pt)
  • Rubbing strake 2x
  • Chain plate 1x Forestay, 1x stb and pt shrouds, 2x backstay
  • Mooring cleats 6x
  • Mooring rope chafe protection, 6x
  • Handrail 2x cabin top
  • Sliding hatch 2x covers companionway
  • Bathing ladder Retractable in stern

    Rig

  • Rudder and steering
  • Balanced spade rudder.
  • Laminated rudder blade. Reinforcement from bi-axial and uni-directional roving.
  • Aluminium rudder stock and wings, which are glued to one half of the rudder before assembly.
  • Rack and pinion steering by a combination between rod and chain.
  • Twin 900 mm diameter s/s wheels and friction brake.
  • Mast & Rigging
  • Mast is fractionally rigged with a keel stepped mast base and a tapered top section. Tube produced from silver anodized aluminium.
  • Mast head: Box with sheaves for main halyard & main topping lift, clevis pin for backstay, Windex.
  • Hounds: Sheave box and leads for gennaker/spinnaker halyard, nose for forestay, shroud backing plate, sheave box for jib
  • halyard and topping lift.
  • Spreaders: 2 sets of anodised aluminium airfoil sectioned spreaders with spreader brackets. Sweep angle 25°.
  • Deck Level: Boom bracket, Kicker bracket, Deck ring assembly.
  • Tie rod assembly, Mast heel & mast base.
  • Standing rigging
  • Discontinuous stainless steel Dy-form wire-rigging. Stud-toggle
  • rigging screws. Chain plates connected to base plates with rod links.
  • Forestay: 10 mm.
  • Intermediate shroud, stem ball <> swage 7 mm, 7/6″ rigging screw.
  • Upper cap shroud eye <> terminal, 10 mm.
  • Lower cap shroud, fork <> rig screw, 10 mm, 3/4″ rigging screw.
  • Permanent backstay eye <> fork, 8 mm.
  • Aft lower shroud, stem ball <> swage, 10 mm, 5/8″ rigging screw.
  • Backstay bridle, 7×19 strands, 6 mm.
  • Furlex 300S TD.
  • Running rigging
  • 1x Main halyard 10 mm, 41 m Dyneema, Shackle
  • 1x Genoa halyard 10 mm, 39 m Dyneema, Snap shackle
  • 1x Main topping lift 10 mm, 42 m 32/3 rope, Shackle
  • 1x Main sheet 12 mm, 50 m 32/3 rope
  • 2x Genoa / Jib sheets 12 mm, 22 m 32/2 rope
  • 1x Vang control 10 mm, 15 m 32/3 rope
  • 1x Backstay 10 mm, 15 m 32/3 rope
  • 1x Mainsheet car 8 mm, 13 m 16/16 rope
  • 2x Genoa Car 8 mm, 17 m 32/3 rope
  • 1x Cunningham 10 mm, 7 m 16/16 rope
  • Sails
  • Mainsail 49 m2 Cross cut Dacron 10,0 oz, 3 reefs, nylon sailsliders, sail bag.
  • Mainsail cover, Canvas.
  • Jib 40,3 m2 Cross cut Dacron 9,0 oz, UV Protection, sail bag.

    Interior

  • Interior
  • Interior in cherry.
  • Walnut flooring.
  • Saloon
  • 1 Set of cushions for starboard couch and 1 set of cushion
  • for movable couch.
  • Saloon table with bottle storage.
  • Pleat window shutters.
  • Handrails.
  • Blinds for fixed side windows.
  • Navigation station
  • Seat cushion.
  • Chart table w/ wooden trims.
  • Separate compartment in navigation table for laptop computer and charts.
  • Owners cabin
  • Roller Blinds for skylights.
  • Headliner form moulded GRP and detachable panels dressed in vinyl.
  • Storage in hanging lockers, chest of drawers and lockers along hull sides.
  • Armchair.
  • Mirror.
  • Starboard aft cabin
  • Sea berth adjustable w/ rope & tackle. Fold-away twin berth.
  • Seat with cushion.
  • Storage in hanging locker and locker with shelves.
  • Headliner from moulded GRP.
  • Pleat window shutters for port lights.
  • 3x Hatches for access to engine and installations.
  • Port aft cabin
  • Seat with cushion.
  • Storage in hanging locker, locker w/ shelves and lockers
  • along hull side.
  • Headliner from moulded GRP.
  • Pleat window shutters for port lights.
  • Mirror.
  • Heads, owners cabin
  • Shower pump.
  • Countertop and sink in composite of natural minerals and
  • acrylic polymer.
  • Laminate seat over toilet bowl.
  • Separate shower with semi-transparent acrylic door.
  • Detachable floor section.
  • Heads, Aft
  • Shower pump.
  • Wet locker.
  • Countertop and sink in composite of natural minerals and acrylic polymer.
  • Mirror.
  • Detachable floor section.

    Galley

  • Galley
  • Worktop in composite of natural minerals and acrylic polymer.
  • Stainless steel double sink.
  • Top loaded fridge 90L.
  • LPG system
  • 2-burner LPG- stove, gimballed.
  • Ventilated LPG bottle storage port and starboard in cockpit.
  • Pressure reduction valve 30 mBar. Shut-off valve at stove.
  • Gas leak detector.

    Electrical system

  • Lights (All LED)
  • (All navigation lights comply with COLREG 1972)
  • Nav lights: 1x Stearn, 2x Bow (red & green), 1x Engine,1x Tricolour, 1x Anchor light.
  • Reading lamp, flexible: Navigation table.
  • Reading lamp: 2x Saloon, 3x Aft cabins, 2x Owners cabin.
  • Spotlights/Breakers: Saloon, Aft cabins, Owners cabin, Heads, Galley.
  • Other lighting: Engine bay, Installation compartment, lockers,
  • Sole in-/outside.
  • 12 V electrical system. Battery bank contains of 1x starting
  • AGM battery (70 Ah) and 2x service AGM batteries (185 Ah)
  • Switch panel is placed at the navigation area.
  • Automatic fuses: Nav lights, Steaming light, Deck light, Anchor light, 3-colour light, VHF, Instruments, Radar, Autopilot, Interior Lights 1–4, Anchor winch, Heater, FW Pump, Bilge pump, Shower pump 1–2, Fridge, Floor light, Tropical fan, Bow thruster, 12V outlets, gauge indicator, WC 1–2, Entertainment, AUX 1–2.
  • Level gauges: Fuel, Water, Voltage.
  • 12V outlets: 1x Nav Station, 1x Galley, 1x Owners Cabin.
  • 230V outlets: 1x fwd cabin, 2x aft cabins, 1x galley, 1x nav. table
  • Main fuse panel, placed under couch in saloon.
  • Fuse Groups: Radio, Mem clock, Heater, Bilge Pump, Aux.
  • Main Switches: Engine, Aux.
  • Charging: 115 Amp generator on engine. Electronic charging regulator.
  • Shore power 230V incl. battery charger 50A.
  • Isolation transformer.
  • Battery control system.

  • Water system

  • Bilge Water System
  • Electrical bilge pump, Suction point at shower sumps, discharge below sheer line.
  • Electrical bilge pump, Suction point at keel sump, discharge above waterline.
  • Manual bilge pump 1 1/ 2″ cockpit, Suction by 5 m loose hose, discharge below sheer line.
  • Freshwater
  • Stainless steel water tanks 340 L. Water lever indicator on instrument panel.
  • Pressurised freshwater pump.
  • Hot water 40 L expansion tank, brine hose fitted overboard.
  • Single lever tap in galley.
  • Single lever tap with shower hose in a aft head.
  • Single lever tap at basin and mixer tap for shower in fwd head.
  • Toilet FWD & Aft
  • Large size toilet bowl. Manual pump.
  • Stainless steel septic tank 44 L.
  • Ultrasonic sensor with level indicator on instrument panel.

    Engine

  • Engine
  • Volve Penta D2-40 E-EVC engine with a S130 saildrive.
  • Freshwater cooled inclusive sea water filter.
  • Folding 3-blade propeller.
  • Fuel system
  • Stainless steel fuel tank 195 L.
  • Ultrasonic fuel level sensor with indicator on instrument panel.

    Electronics

  • Raymarine i 70 (speed/depth).

    Other

  • Safety
  • 3x Fire extinguisher.
  • Fire-port for engine room.
  • Other
  • Packing for delivery on truck.
  • Document Bag containing manuals.
  • Mooring package contains 6x fenders with lines and socks, telescopic hook,2 x mooring line 16mm 6m, 2x mooring line 16mm 10m,
  • 1x Anchor 10kg, 1x anchor chain 8mm 3m, 1x anchor line 14mm 40m.

Equipment Options

         Hull

  • Lead short keel, draft 1,8m ( 3746 kg)
  • Dark blue hull
  • Burgundy hull
  • Grey hull
  • Defending strip along hull made of stainless steel

    Deck

  • Deck Equipment
  • Gennakersprit with anchor roll (includes anchor roll fitting, genaker sprit, stay for sprit s/s wire
  • Anchor winch in bow 1000 W Quick (incl. remote control)
  • Galvanised chain 8 mm, 50 m, Delta anchor 16 kg
  • Leaded line 16 mm, 50m, Delta anchor 14 kg
  • Fixed main sheet attachment in cockpit floor, track deduct
  • Gates in guardrail at starboard & port
  • Sprayhood extension (cover)
  • Steering pedestal cover
  • Teak deck
  • Winch genoa/halyard upgrade to Harken 46 CEST electrical; pair
  • Winch genoa upgrade to Harken 54 CEST electrical; pair

    Rig

  • Rigg & Sails (North Sails)
  • Furling jib/genoa cover
  • Furling mast, manual; add
  • Furling mast, electrical; add
  • Furling 140%, DC Mylar, Triradial incl. UV-protection
  • Jib; Furling 105%, DC Mylar, Triradial incl. UV-protection; upgrade
  • Gennaker Equipment
  • Gennaker Full radial G-3 Norlon 0,75 oz 108m2
  • Spinnaker Boom cruising, aluminium
  • Spinnaker boom racing, carbon
  • Spinnaker track
  • Spinnaker equipment (single blocks, tweeker blocks, cam-cleats, halyard, lift, sheets and tweckers)
  • Furling Jib with Battens 3DL 680
  • Mainsail 3DL 680 (70:30 Aramid/Carbon) 19,600 Dpi
  • Spinaker Nyrlon NO 150
  • Furling Jib Nordac ND94HA
  • Standard Mainsail Nordac ND94HA
  • In-Mast Furling MAINSAIL SOFT NORLAM NLSX 9.0 NLXW

    Interior

  • Carpets in saloon, fwd and aft cabin(-s)
  • Interior in teak
  • Natural teak on the floor
  • Mattress material extra color
  • Cockpit cushions
  • Cockpit table
  • Blind for fixed side windows
  • Hatches and skylights roller (Oceanair rail)
  • Change from sea berth to cup board section in stb aft cabin

    Galley

  • Corian in galley
  • Microvave oven, brushed s/s
  • Seawater foot pump in galley
  • Watermaker Schenker Modular 60M12

    Electrical system

  • Shore power 230V incl. 60A battery charger and 3 additional service batteries 100 Ah each
  • Inverter / charger Mass Combi 12/2500-100 (230V)
  • Interface NMEA monitoring engine parameters (on MFD)

    Water system

  • Shower on bathing platform, hot & cold
  • Electrical WC; in both heads (2 toilets)

    Engine

  • Engine & heating
  • Folding propellor Gori 3-blade to D2-40 sail drive
  • Folding propellor Gori 3-blade to D2-55 sail drive
  • Volvo Penta D2-55 (41 kW)
  • Docking system, Side-power – package
  • Bow thruster retractable
  • Heater Webasto (5,5 kW)
  • Deck washing system (pump with hose)

    Electronics

  • ST70 Wind System (data shown on the std i70 display )
  • Multi display Ray i70
  • Chartplotter Ray c95 with EU charts and built in antenna
  • Chartplotter Ray e95 with EU charts and built in antenna
  • Chartplotter Ray e125 with EU charts and built in antenna
  • GPS antenna Raystar 130
  • Radar rantenna RD418 HD, mounted on side of mast
  • Autopilot Ray SPX 30, contr p 70, drive unit type 2
  • VHF Ray 55E mounted at chart table, VHF-antenna
  • VHF external station Raymic mounted on pedestal
  • AIS 650 Raymarine
  • Samsung LED TV 19” with antenna
  • Audiopack FUSION radio with mp3, CD, USB, 2 speakers in salon and 2 in the cockpit
  • B&G/Simrad Navigation Aids
  • B&G Triton 41 Speed/Depth – pack
  • B&G Triton Wind
  • B&G Tritin T 41 – extra display
  • B&G Triton Autopilot (Simrad course computer)
  • MED. B&G T8 Zeus Touch with EU maps
  • NAIS 400 + NSPL 400 AIS Transceiver + antena spliter
  • VHF Simrad RS 25 z DSC, with antena and brcket for the mast

    Other

  • Boat rigging and delivery in Scharendijke
  • Boat rigging and delivery in Gdansk